Now we are selling Wedge Wire Screens Filter Nozzle, welcome to order.-
Home > Products > Wedge Wire Filter > Filter Nozzle
Wedge Wire Screens Filter Nozzle

Wedge Wire Screens Filter Nozzle

  • Category:Wedge Wire Filter
  • Material:Stainless steel 304,304L,304HC,316,316L,321,430 or as per your request.
  • Properties:filter nozzle
  • Application:filters, strainers, architectural screens, water treatment underdrains, media support grids and overlays, infiltration gallery screens
  • tag:Wedge Wire Filter Nozzle, Wedge Wire Screen,Manufacturer,
Wedge Wire Screens Filter Nozzle
Wire Mesh Wire Mesh
If you can envision it,We can supply it. E-mail:sales@uboscreen.com 2022-01-10By Lisa

Description of Wedge Wire Screens Filter Nozzle:

The Wedge Wire screens wedge wire filter nozzle is an ideal solution for applications with heavy amounts of media whose weight could compromise the integrity of unsupported screens. That’s because nozzles are affixed to durable steel plates that can withstand great loads without damage. Using the nozzle method gives you the reliability you want with the flow rate you require.

Our company can provide many kinds of filter nozzles. About the structure, the nozzles are closed on one side and have a threaded fitting on the other. And the nozzles may be installed in lateral pipes or in suspended floors. A nozzle has two main components, a strainer to exclude the media or packing gravel and a thread. Besides also can be add gasket and nut as require. The filter nozzle slot sizes vary considerably from about 0.05mm to around 2mm, larger slots best suited for up flow filters. Slots of 0.2, 0.3 & 0.35mm are commonly used in direct contact with the filter media without the requirement of a gravel layer on top of the nozzles. This direct contact has an advantage for combined air scour and water backwash. Care must be taken to avoid grit particles entering with the backwash water if slots less than 1.0 mm width are to be used. The flow rate can be 0.5m3/h to 3 m3/h. The thread can be M, NPT, G, PT, Z, or produced according to the customers’ require.

nozzle filter

Advantages for Wedge Wire screens wedge wire filter nozzle

1. Type 316L stainless steel construction.
2. Continuous slot design provide large circulation area
3. Standard nozzle are 2in/51mm diameter and can be attached to the plate either with threaded end fittings or "L" blots.
4. Standard slot opening is typically range between 0.006”(0.15mm), and 0.020in./0.50mm wide suitable for 40 to 50 mesh size media, Other slot sizes are also available.
5. Wedge wire screen is highly resistant to plugging.
6. Choice of either 3/4” NPT or 1” NPT fittings are available from stock. Other styles, such as tee-bolt mountings, and drop tubes are readily available.
7. Unaffected by temperature, corrosion resistant, aging resistant, long life span, easy change, saftey and enviormental friendly.

Wedge Wire screen nozzlefilter nozzle

if you are interested in receiving more information or have a question regarding any of our products please fill out the form below and we will contact you within 24-48 hours.
Wedge Wire Screens Filter Nozzle Related
Wedge Wire Screens Filter Nozzle News
Wedge Wire Screens Filter Nozzle Tips
Copyright Hebei YUBO Filtration Equipment Co.,Ltd.About YUBO | Products | Service | Contact Us |Frequently Asked Questions
E-mail:sales@uboscreen.com Tel:+86 311 8595 5658