- straight looped wedge wire Related
- straight looped wedge wire News
-
- straight looped wedge wire Tips
-
straight looped wedge wire
|
Straight looped wedge wire is made from round wire which is first looped at regularly pitched intervals and then pressed into a deep wedge shaped section. The loops themselves are pressed so as to produce at each side accurately sized spacing shoulders which butt together when the wires are assembled. The width of the slot apertures in the finished panel is determined by the difference between the width of the top face of the wedge profile and the width over the spacing shoulders. The individual Wedge Wires are built into panels by feeding cross rods of suitable diameter through the loops of the wires.
The whole is then clamped together and made secure. The finished sieve is therefore a grille made up of cross rods supporting profiled wires with loops.
Looped Looped Wire screens provide the perfect solution to vibratory applications that require high strength both laterally and transversely.
Wires are looped around a supporting cross rod and compressed to fit snugly.
Slots can be manufactured to 0.005”.
Looped Wire is used in the following industries; Brewing, Pulp and Paper, Chemical, Mining and Aggregate and Waste Water, and more.
Supplied in both straight and deep arch design.
Deep arch design provides several advantages to a straight wire, especially in a dewatering sieve application:
Concentrates the liquid at the low point of the arch and away from the support bars.
Reduces blinding (clogging).
Self-cleaning due to the side way movement of the liquid.
Higher retention rates.
Increased flow capacity.
Ubo is specialized in producing and distributing wedge wire screen,lauter tun screens,sieve bend screen,sieve plate screen,water strainer&nozzle,screen nozzles,centrifuge screens and baskets,header-lateral.
Welcome to contact us for more information and cooperation.0086-0311-83289301.