Description of con-slot screens:
Trommel screens provide a simple, efficient and economical solution to upgrade a wide rang of material and optimize the subsequent process steps of recovery. This method of screening helps to reduce operating and investment cost and to increase product quality, while allowing rapid and large volume processing.
Our Trommel screens are constructed of high quality material, designed for high performance, high production rates, lower operating costs and lower maintenance.
This material is then passed on to the downstream process equipment which can be in various forms such as centrifugal Concentrator, spirals, jigs etc.
Features of Con-slot Screens:
1) Configured for economical & efficient classification, Screening and grading
2) Heavy duty trommel drum with lifters at the front to facilitate material break up
3) Screen replaceable for different mesh sizes
4) Multiple screen size
5) Easily changed screen plates
6) Largest processing capacity in the industry
7) Unique screen design, result in higher capacities, longer screen life and no material clogging
8) Heavy duty feed hopper and extension
9) Discharge chute
10) Gear drive mechanism
11) Variable speed drive mechanism
Application of Con-slot Screens:
Use for oil well , water well , geothermal well , sewage and industrial wastewater disposal plants, food equipment, liquids filtration,cleaning treatment
Specifications of con-slot screens:
Material:stainless steel 304,316,316l,320,Hastelloy C
Wire Diameter: 1.5X2mm, 2x3mm, 3x6mm
Length: MAX 6 meters.
Diameter:MAX 280mm
Slot Size: 0.10, 0.15, 0.20, 0.25, 0.30,....., 3.00 also achieved upon request.
Slot Width Tolerance:
Slot width shouldn't exceed 0.02mm and shouldn't less than 0.01mm compare to standard size when slot width is below 0.2mm
Slot width should be controlled within ± 0.02mm compare to standard size if slat width is bigger than 0.25mm
Plating:
Hard plating the wedge bar surface, plating thickness is 0.20-0.30mm. surface hardness >HRC : 60-66 (HV700-900)
Product Structure : wedge wire screen and stainless steel pipe
Surface Treatment: polishing
group 1
|
surface profile:triangle wire,support profile:triangle wire
|
A1XH1
|
1.5X2.0,1.5X2.5,
2.0X3.5,3.0X4.5,
3.0X5.5,3.5X5.0mm
|
|
S
|
0.5-4.0mm
|
A2XH2
|
2.0X3.5,3.0X4.5,
3.0X5.5,3.5X5.0,
5.0X10.0mm
|
P
|
10-300mm
|
group 2
|
surface profile:triangle wire,support profile:round wire
|
A1XH1
|
1.5X2.0,1.5X2.5,
2.0X3.5,3.0X4.5,
3.0X5.5,3.5X5.0mm
|
|
S
|
0.5-4.0mm
|
D
|
2.5-5.0mm
|
P
|
10-300mm
|
group 3
|
surface profile:triangle wire, support profile:flat wire
|
A1XH1
|
1.5X2.0,1.5X2.5,
2.0X3.5,3.0X4.5,
3.0X5.5,3.5X5.0mm
|
|
S
|
0.5-4.0mm
|
A2XH2
|
1.8X10, 2.0X10,3.0X10mm
|
P
|
10-300mm
|
group 4
|
surface profile:triangle wire, support profile:wedge wire
|
A1XH1
|
1.5X2.0,1.5X2.5,
2.0X3.5,3.0X4.5,
3.0X5.5,3.5X5.0mm
|
|
S
|
0.5-4.0mm
|
A2XH2
|
A2=2.2-3.0,H2=4.5-5.5mm
|
P
|
10-300mm
|
con-slot screens' Production And Sales:
YUBO is specialized in producing filter elements and wedge wire screen products. We have
10 years OEM ,ODM, and filters design experience.
Wedge Wire Screen Production Process:
The outside of each section is banded with steel bar and lengths of steel strips are supplied to provide a seal between sections. Typically, the screen has .030" to .040" slot openings to hold back the solids and allow liquids to pass through.
The lauter tun screen sits on a ledge that is positioned on the inside diameter of the tank. It may also be necessary to have support beams depending on loading and tank diameter.
Example of Lauter Tun screen description
You also interested in other products for Wastewater: