- Continuous slot wire wrapped water well screen Related
- Continuous slot wire wrapped water well screen News
-
- Continuous slot wire wrapped water well screen Tips
-
Continuous slot wire wrapped water well screen
|
Continuous slot wire wrapped water well screen is made by winding cold-rolled wire, approximately triangular in cross section, around a circular array of the longitudinal rods. The wire is attached to the rods by welding, producing rigid one-piece units having high strength characteristics at minimum weights.
Slot openings for continuous-slot screens are manufactured by spacing successive turns of the outer wire to produce the desired slot size. All slots should be clean and free of burrs and cuttings.
Each slot opening between adjacent wires is V-shaped, from the special shape of wire used to form the screen surface. The V-shaped openings designed to be non clogging, are narrowest at the outer face.
1. Screens with high open area are more suitable for the construction of high-quality water wells, oil wells and gas wells.
2. Low cost operation.
3. Reduce the abrasion of the pump.
4. Extend the life span of well.
USA ; Australian, Brazil , Romanian, Holland ; Bulgaria, Malaysia ; Singapore ; Philippines ; Vietnam; India...
UBO is specialized in producing and distributing wedge wire screen,lauter tun screens,sieve bend screen,sieve plate screen,water strainer&nozzle,screen nozzles,centrifuge screens and baskets,header-lateral etc. Welcome to contact us for more information and cooperation.0086-0311-83289301