|
Wedge Wire Wrapped False Bottom Lauter Tun Screen Filter for Brewing
 
|
The wedge wire wrapped false bottom lauter tun screen filter for brewing is made by wrapping and welding stainless steel V-shaped profile wire cylindrically around support rods under automatic wire screen machine, then be made to screen panel through cutting and edge welding. Each profile wire and support rod is welded by resistance welding. It generally made of stainless steel 304, 304L,316, 316L, 321 etc. We also produce special material according to the customer request.
In the lautering process, the wort (the liquid containing the sugar extracted during mashing) is separated from the grains. This is done either in a lauter tun outfitted with a false bottom or in a mash filter. Most separation processes have two stages: first wort run-off, during which the extract is separated in an undiluted state from the spent grains, and sparging, in which extract which remains with the grains is rinsed off with hot water. The lauter tun false bottom is designed to hold back the large bits of grist and hulls. The bed of grist that settles on it is the actual filter. Lauter tuns have provisions for rotating rakes to cut into the bed of grist to maintain good flow. When the process is complete, a plow can be dropped to drive the spent grain out of the vessel.
1) A continuous slot opening which significantly increases the available open area, thus providing a greater access to the water bearing zone.
2) A 'V' shaped wedge wire which avoids clogging and ensures uninterrupted flow.
3) A uniform and efficient well development due to the continuous slot opening.
4) Offering great strength. precision, long service life
1. Water treatment equipment
2. Environment protection
3. The sea water desalination
4. Water softening treatment
5. Oil and chemical processing
6. Terminal filtration for petroleum products
7. Filtration for chemical acid and soda liquid
8. Alcohol and other organic solvents recycle filtration.
E-mail:
