- Stainless Steel Water Well Screen Tube Backflushing Regeneration Pipe Related
- Stainless Steel Water Well Screen Tube Backflushing Regeneration Pipe News
- Stainless Steel Water Well Screen Tube Backflushing Regeneration Pipe Tips
Stainless Steel Water Well Screen Tube Backflushing Regeneration Pipe
|
Stainless Steel Water Well Screen Tube Backflushing Regeneration Pipe is made by wrapping and welding stainless steel V-shaped profile wire cylindrically around support rods under automatic wire screen machine. Each profile wire and support rod is welded by resistance welding. And the V-shaped wire can be made in different height and width to address various strength application, meanwhile, the spacing of individual slots can be varied during fabrication if geologic conditions require these variations in a screen's construction.
1. Composed of surface profile;
2. High open area;
3. Non clogging filter surface;
4. Spirally wrapped around the axial support profile;
5. Accurate, narrow slot openings;
6. Triangular wedge wire design creates orifice effect Cake discharge by back washing.
The water well screen tube can be application in deep well pump to dive the water pump, in the water-treating equipment, the environmental protection, the sea water transforms into the industrial water and life use water desalination treatment, running water treatment, water softening treatment; the petroleum industry, the petroleum product terminal filters; and the chemical acid, the alkali liquid filters, the ethyl alcohol and the organic solution recycling filters
The backflushing regeneration pipe is composed of rod strips and V shaped wires through manufacturing on specialized welding machine. The rib strips and V shaped wires will be welded by resistance welding, has enough welding strength, equally slot gap, high corrosion resistance, large filter area, good permeability, simple structure