- Sieve Bend Screen / Side Hill Screen Surfaces Related
- Sieve Bend Screen / Side Hill Screen Surfaces News
-
- Sieve Bend Screen / Side Hill Screen Surfaces Tips
-
Sieve Bend Screen / Side Hill Screen Surfaces
|
The dewatering capacity of a wedge wire cross flow sieve bend screen is primarily influenced by the screen width, the slot opening, and the wire size (width).
Actual capacity varies depending on the feed content and desired efficiency. Screening efficiency and solids capacity are directly related to the length (arc length). Longer arc lengths should be considered for feed containing a high percentage of solids.
The dewatering capacity of cross flow dewatering screens such as the sieve bend can be greatly increased by tilting the wedge wires. The wedge wires are tilted 2 to 7 degrees depending on the wire size and slot opening.
High strength;
Good resistance to abrasion and corrosion;
High rigidity;
Good in filtration and fluidity;
Flat panel surface;
Fairly well precision and roundness;
Long work time.
Easy to clean and back wash;
Uniform gap.
The wedge wire screen nozzle/sand filter nozzle with thread coupling can be fixed on the filtering equipment for the filteration of water petrol resin and other medium. Also it can be used in the water treatment, water softhening, conversion of sea water into fresh water, the filter of food chemistry.
Small systems may be built moduarly from off-the-shelf components requiring minimal customization.
The effective range of slot openings for a gravity-fed cross flow sieve bend screen is generally considered to be .015" to 1/8". The installation angle of a sieve bend screen is usually 50 to 60 degrees from the horizon.
The point of size separation is approximately 50% of the slot opening size.
Ubo is specialized in producing and distributing wedge wire screen,lauter tun screens,sieve bend screen,sieve plate screen,water strainer&nozzle,screen nozzles,centrifuge screens and baskets,header-lateral.
Welcome to contact us for more information and cooperation.0086-0311-83289301.