- Wedge Wire Welded Screen Resin Traps Related
- Wedge Wire Welded Screen Resin Traps News
-
- Wedge Wire Welded Screen Resin Traps Tips
-
Wedge Wire Welded Screen Resin Traps
|
The wedge wire element in a Resin Trap/ Strainer is normally a slot tube, but can also be a cylinder. A Resin Trap / Strainer is normally closed on one side and has a flange on the other. They can be made for flow-in-to-out (FITO) or flow-out-to-in (FOTI) filtration.
A Resin Trap / Strainer normally serves to retain particles in a process flow. The quantity of particles is normally very low, so that cleaning can be done during flow interruption
-- Very precise slots for perfect particle retention combined with minimum obstruction of the process flow.
-- Flexibility in design.
-- Strong construction (self supporting).
-- Large open area.
-- Plug-resistant slot design
Application: water treatment,oilfield,mining,food industry,chemical industry,papermaking industry,decoration.
-- To capture expensive resin that escapes from a treatment vessel by accident
-- To protect equipment further downstream
-- A strainer is often used in tubes to block unwanted particles or dirt that would otherwise damage downstream equipment. Cleaning is carried out by removing the strainer from the tube.